Email for Best Price!


Print PDF



  • Motorized Table Lift
  • Variable Speed Conveyor, inverter drive
  • Conveyor Forward & Reverse
  • Belt Safety Overtravel Switches
  • Electronic Eye Belt Tracking. Belt tracking adjusting lever (Belt Trimmer) to Re-adjust the tracking system when running extremely out of parallel belts
  • Heavy Duty JackscrewTable Support
  • Double Infeed & Outfeed Pinch Rolls with protective guards
  • Conveyor Belt Tracking System
  • Safety System with Disc Brake. Air operated disc brakes to stop sanding head in 3-5 seconds in the even of loss of air pressure or activation of any emergency stop device
  • Table Height Digital Readout
  • Load Meter indicates percentage of full motor loads
  • Belt change door electrically interlocked for safety purpose
  • Air tensioning of belt for accurate tensioning & compensation of belt stretch
  • Quick release sanding head support for fast belt change
  • Dust collection hood with 6” outlet is located adjacent to abrasive head in sanding area
  • Emergency stops from almost any point
  • Noise level bellows 82 dba
  • Operation manual, control tags, danger signs, and warning labels in English on machine
  • 208/230V or 460 Volt, 3-Phase
  • Total amps 130 @ 230/3/60
  • Compressed air required: 2 CFM @ 90 PSI
  • Abrasive belt, 120 grit


  • Model DC5 (7.5 HP) Wet Dust Collector - Wet dust collectors use a water filled tank through which all grinding dust is pulled by a motor driven impeller fan.  Particles sink to the base of the tank where they can easily be removed by raking into a provided container.  Normal tap water is used, there are not filter bags to be changed.  Water level is automatically controlled when unit is connected to a water supply.  All units are equipped with explosion relief door and sound silencer.
  • Heavy Duty Ducting Package
  • *CAUTION: If fire hazardous materials, such as aluminum, titanium, magnesium, etc., are to be processed, a dust collection system that conforms to National Fire Protection Association (NFPA) should be used
Max. Part Width
Abrasive Belt Size
40" x 75"
Contact Roller Size
8" Dia.
Passline Height
Max. Thickness Capacity
Conveyor Drive Speeds
8-40 FPM
Infeed Conveyor Length
Dust Collector Capacity
3,000 CFM
Motor for first sanding belt head
15 HP, 230V or 460V, 3-Ph
Motor for second sanding belt head
15 HP, 230V or 460V, 3-Ph
Conveyor Motor
2 HP, 230V or 460V,3-Ph
Table Lifting Motor
1 HP, 230V or 460V, 3-Ph
Net Weight, approx.
7,650 lbs

Please Request a Quote